Prime Evaploc Concentrate

Description

Prime Evaploc is a concentrated, water-soluble evaporation retarder designed to reduce moisture loss from freshly placed concrete. Applied by spray, it helps slow surface evaporation in hot and windy conditions, reducing the risk of plastic shrinkage cracking and keeping the concrete workable for longer. Its fluorescent green colour assists with even application and disappears without leaving permanent staining once cured.

Key Features:
Helps reduce plastic shrinkage cracking by reducing rapid surface moisture loss.
Extends surface workability in hot and windy conditions.
Helps achieve a smoother, creamier finish under the trowel.
Fluorescent green colour assists with coverage and application control.
Concentrated formula allows dilution to suit different applications.
Suitable for use with Prime Retarder in exposed aggregate applications.

Suitable For:
Freshly placed concrete in hot, dry or windy conditions.
Concrete slabs and general concrete finishing.
Applications where surface evaporation needs to be controlled.
Exposed aggregate concrete when used in conjunction with Prime Retarder.

Product Specifications;
Product type: Concentrated, water-soluble evaporation retarder
Standard dilution: 1 part Evaploc to 9 parts water
Standard coverage: Approximately 50m² per 10L of diluted product
Application: Spray application
Appearance: Fluorescent green concentrate

🔮 WWIS Pro Tip.
For the best protection against plastic shrinkage cracking, thoroughly wet the ground before placing concrete, then apply Prime Evaploc at the recommended dilution immediately after screeding. In hot or windy conditions, consider a second coat after finishing, once the surface is firm enough to avoid marking or damaging the concrete. Always follow the recommended dilution and application timing for your specific job.