Nutech EPiC Epoxy 100

Description

Nutech EPiC Epoxy 100 is a high-performance, two-pack, solvent-free epoxy coating designed to protect and enhance interior concrete floors. With a 100% solids formulation, it delivers a durable, high-build finish with excellent adhesion and resistance to scratching, abrasion and heavy wear.
Suitable for domestic, commercial and industrial environments, EPiC Epoxy 100 offers excellent resistance to fats, oils, petrochemicals, alkalis and salt solutions. Its impervious finish also helps protect concrete against moisture penetration, making it suitable for demanding interior flooring applications.
With excellent flow and self-levelling properties, EPiC Epoxy 100 can be applied by brush or roller as a protective floor coating. When mixed with clean, dry fine silica sand according to the manufacturer's instructions, it can also be used to create a trowel-applied self-levelling compound or mouldable coving compound.

Key Features & Benefits:
High-performance protection: Resists scratching, abrasion and everyday wear.
Excellent chemical resistance: Withstands exposure to fats, oils, petrochemicals, alkalis and salt solutions.
Solvent-free formulation: 100% solids with 0% volatile content as specified in the product data.
Strong adhesion: Designed to bond securely to properly prepared concrete.
Versatile application: Suitable for roller or brush application, as well as sand-modified self-levelling and coving compounds.
Seamless, high-build finish: Helps create a durable, easy-to-clean interior floor surface.
Broad application range: Suitable for residential, industrial, hospital, hotel, automotive repair and commercial projects.

Typical Applications:
Interior concrete floors
Commercial and industrial flooring
Workshops and automotive repair facilities
Warehouses and service areas
Residential and multi-residential concrete floors
Trowel-applied epoxy compounds and coving details

Product Specifications;
Product type: Two-pack Clear epoxy coating
Recommended substrate: Concrete
Finish: Clear, viscous liquid before application
Coverage: Approximately 2–3 m²/L
Minimum dry film thickness: 110 microns per coat
Touch dry: Approximately 2 hours
Recoat time: Approximately 4 hours, within 24 hours
Hard cure: Approximately 7 days
Pot life: Approximately 30 minutes after mixing

🔮 WWIS Pro Tip.
For the best results with EPiC Epoxy 100, make sure the concrete is sound, clean and free from oil, grease, dust and other contaminants. New concrete must be cured for at least 28 days and have a pH below 10, in accordance with the TDS. Mix only what you can apply within the product's 30-minute pot life, and allow the coating to cure fully before putting the floor into service.